Socks, Take 2: Birthday Stripes

Remember how I was talking about allllll of the birthdays in March? Well, this birthday was in February. And I finished the socks in June. Yep.

These socks were made for my good friend, Jessica, and she didn't seem to mind too much getting a birthday present four months late. Maybe if I ask really nice she'll even send a picture of her feet in the socks. *cough*

I used the same pattern as in my first pair of socks, Lauren's Basic Worsted Weight Socks. As you can see, however, there was a little stripe action thrown in there! Stripes are fun.

For the ribbing on top, I knit four rows of each color (red, brown, red, brown, red) before transitioning into the body. The heel was done in the contrast color (red) and then I stopped an inch short of where I normally would to start the banded toe decrease.

Then it was 2 rows of each color (red, brown, red) and then 4 rows of brown. Finally, I knit the tow decrease in red.

Yay, socks again! I definitely still could use some practice though, as the decreases and color changes weren't as clean as I'd like them to be. I think these will make some killer slipper socks though! Happy warm feeting, Jess.

Yarn:
Cascade 220 Superwash Quatro (100% superwash wool)
1 skein Brown Bear (1936)

Cascade 220 Superwash (100% superwash wool)
1 skein Maroon (855)

Needles:
US5 (3.75mm) double pointed needles

Scarves are for spring, too!

Just because spring and summer roll around doesn't mean that I want to stop wearing scarves. And this is still Seattle, after all.

Quite a while ago I bought this sparkly, purpley yarn. At the time I had it in mind to make a second Grace Lace Beret. That never came to be and so I pulled it out of my stash and went looking for something to make.

I went poking around on Ravelry for things like "spring scarf" and "lightweight scarf" and decided on the One Row Lace Scarf.

This was incredibly easy to knit, which also made it incredibly fast to finish. Just like the name says, it's just one row that you have to learn: K4, *YO, K2tog, K2*. Just do that until you're out of yarn or until you reach the desired length and voila! Scarf.

It's nice and reversible, which I love. I think I would knit more lace if I wasn't as turned off by the wrong side. (I should really get over that.) I really like the way this lace looks when stretched out, but because it's so floppy and the holes are large, it collapses on itself when you're wearing it. That said, it still looks nice on and I like it quite a bit.

Yarn:
Louisa Harding Jasmine (48% cotton, 39% bamboo, 10% silk, 3% polyester)
50g/107 yd skein
2x Slate (13)

Needles:
US9 (5.5mm) circular needle (straight would be just fine, too)

Socks on my head? Sure!

There were a couple of desires that led me to this pattern -- first, I was about to go on a trip overseas and wanted a project that was simple and easy to carry around. Second, there is some really cool sock yarn out there and I wanted to use some!

I saw my knitting teacher, Alex, knitting this hat and learned that it was something like his 6th one (so he must kind of love it). And you just can't argue with a name like Sockhead Hat.

This hat is really super easy. I knit the 4” of ribbing that the pattern calls for but then only knit about 4.5” in stockinette, instead of the 9” in the pattern. My hat is still slouchy, especially without the brim folded.

On the next one I make, I think I’ll throw in a knit row in the middle of the ribs so that I can fold it in the middle with a crisp edge. I'm glad to have a fun project that will use that aforementioned really cool sock yarn and also show off its colors and variegation well.

Yarn:
Berroco Sox (75% superwash wool, 25% nylon)
100g/440 yd skein
1x Venachar (1431)

Needles:
US4 (3.5mm) 16" circular needle

Grandma's Special Birthday Shawl

Speaking of birthdays, March 21 is Grandma Lois' birthday and this year was a big one. (I'll refrain from announcing which birthday it was exactly... you know a lady is entitled to some secrets.)

I wanted to give her something special for a birthday and so I decided to try and knit something nice. It being spring, I wanted something light and bright. It's spring in the Northwest, though, so I also wanted something cozy. Versatility! Lastly, she's heading out on a great European cruise soon and those boat decks can get chilly.

To meet the light-yet-cozy requirements, I decided to take another swing at knitting lace. I'd done some of this with my Grace Lace Beret and felt that was pretty simple. So after some perusing on Ravelry, I settled on the Knit Lace Shawl/Châle en Dentelle au Tricot.

I picked out some really pretty and soft Merino & Alpaca yarn in a great, light heathery green and I waited for a class night to get started. This pattern is made up of four repeating rows and I think this fact gave me a false sense of security to start... but I figured I'd probably run into some questions. I was right! After two hours in class and a good deal of help, I had gotten the first two rows done. That's it. I had to start over probably three or four times, as I just couldn't get the stitches to come out right at the end of each row. This worried me a bit, as I had not given myself a whole lot of time to get this done.

But, I got the hang of it! The first few inches were slow going... but then I finally started to get it down and move more quickly. After a handful or two of repetitions I started to see the patterns and where each stitch was meant to sit. At that point, I just booked through as fast as I could.

I'd given myself about a week and a half from starting this project until Grandma's birthday party and I was not at all convinced I would get it done in time. But I did! Hooray!

This being lace, it needed to be blocked to open up the pattern and make everything lie the way it's meant to lie. This is something that I've avoided with each project but one old one, and with that old one it didn't really work. But... this was a good time to give it another shot.

I laid two towels down on the floor and pinned the shawl down, stretched out into it's proper shape. Then I turned the iron on to Super Steam Mode and steamed the thing until it was damp and hot. Then I just let it dry. And wouldn't you know... when I unpinned it the next day, it had worked! So, I
guess now I know how to block.



I am really pleased with how this turned out in the end and I think my grandma liked it too! :D








Yarn:
Louisa Harding Thistle (60% Merino Wool, 40% Baby Suri Alpaca)
50g/98 yd skein
5x Bracken (6)

Needles:
US10 (6mm) 16" circular needle

March Birthdays, Part 1: Spiral Beanie & Cabled Gloves

Has March always had this many birthdays? I think it gets more and more packed with them every year. At least they're birthdays of some of my favorite people! I just wish that I had the time to knit something for all of the people on that list. We all know that even though they're calling it Spring now, it's really still hats and gloves and scarves time around Seattle.First, the Spiral Rib Hat for the wonderful and talented Vince Martinez with a birthday on March 11. This is a hat for which I had admired a sample in class and watched a couple classmates making. The hat is simple and quick and is totally unisex. Just pick the right yarn for the right person.

I haven't found a free pattern anywhere, but purchased one for $3.50 from Lauren. I very rarely pay for patterns (I mean, really... there are so many free ones out there!) but this one was totally worth it. It's set up with information to make four different sizes (child, kid, small adult, large adult) and with eight different gauges. Sweet! I can use it over and over and over and over...

This hat really was fun to knit. And did I mention quick? I think I made it in something like three hours. This is pretty great when you decide to make someone a birthday present four days before said birthday.

Yarn:
Cascade Yarns 128 Superwash (100% Superwash Merino Wool)
3.5oz/128 yd skein
1x Bitter Chocolate (872)

Needles:
US10.5 (6.5mm) 16" circular needle & double pointed needles

----------
Then, the Dashing fingerless gloves for the wonderful and talented Lilianna Koledin with a birthday on March 27. Again, there were samples of these gloves in the store and I always liked them a lot. Lauren dubbed them her "favorite dog walking gloves" and I thought, "hey, Lili has a dog that walks!"

I was always kind of scared of the thumbs on gloves... and I'm still too scared of that kind of thing to ever try real gloves with all five fingers. This pattern has a really neat set up for that thumb though. Basically, you knit in some waste yarn for a few stitches in the right spot and keep going like normal. When you're done with the main tube, you just take out the waste yarn, stick those loops back on the needles, and knit a smaller loop. Genius.

I learned with this pattern that cabling back is somehow much harder than cabling front. It seems like it would be no big deal... the stitches held on the cable needle just go in back instead of in front. But no. Somehow, it's both more cumbersome to hold and turns out with bigger holes and other funkiness. That all got patched up though and I'd imagine that next time I try it will look cleaner.

I was careful to count all of my rows so that the two gloves would match. Of course, it didn't work out that way and one was a bit longer. We can just say that I did it on purpose... a reminder that they're hand made?

I want some for myself now, hehe.

Yarn:
Plymouth Select Worsted Merino Superwash (100% Superwash Fine Merino Wool)
100g/218 yd skein
1x Moss (12)

Needles:
US7 (4.5mm) double pointed needles

Taking the sock obsession to a whole new level!

I love socks. The sock drawer in my dresser won't close when all of mine are clean. I also love knitting. It's really a match made in heaven.

The term "turning a heel" always struck a bit of fear in my heart. I think that was just because I thought it sounded really hard. Are we sensing a pattern here? Carmen seems to be easily intimidated and should just suck it up more often and get to the part where she learns that it's really not that hard.

Enter my first part of socks!

After months of encouragement and professions of sock-knitting love from my classmates, I bit the bullet and started my first pair of socks. Lauren helped me pick out a great skein of superwash (that is, machine washable!) yarn, printed me out her own Basic Worsted Weight Sock pattern and off I went!

There is about 2.5" of ribbing on top of each sock and then most of the rest is made by knitting around and around and around and around. Where it gets exciting is when it comes time for the dreaded turning of the heel.

It's really not that big of a deal (go figure). Basically, you take half of the stitches and use them to knit a flap with some slipped stitches and knits and purls mixed together. Once you've done that for another 2.5", you pick up stitches along each edge. Now that you're back on all four needles, the gusset and gusset decreases start with K2togs and SSKs and you find that you're turning that heel without even knowing it.

Once you've made it back to your original number of stitches, you knit around and around and around and around some more until it's time to start the banded toe. There are some more K2togs and SSKs and pretty soon your ready for the next and last feat (get it??). This is the kitchener stitch that's used to close up the toe in a nice, seamless sort of way.

These socks are quirky. See how one toe is darker than the other? Yeah... I definitely ran out of yarn before I was done. I'm a tight knitter, which requires more yarn to cover the same distance. And of course there wasn't any more in the shop. So I grabbed a new coordinating color instead. Good news is it's a great yarn for a new project I had in mind! Silver lining, my friends.

A little harder to see in these pictures is the fact that one of the ribbed cuffs is wider than the other. It's really only 1/4-1/3" but still... you can definitely tell. I have been assured that it's fine to just leave that part under the pants when I'm showing them off.

All in all, I'm stoked and already working on the next pair!

Yarn:
Pagewood Farm Kiana Hand Dyed Light Worsted Yarn (100% Merino Superwash)
3.4oz/225 yd skein
1x Army Girl

Needles:
US5 (3.75mm) double pointed needles

More hats! I will eventually either learn or learn my lesson.

Hat attempt #5 (or whatever the heck number I'm on now) spurred from the Irish Hiking Hat - Bulky Version that I came across on Ravelry. I really liked the unique design and that fact that I didn't quite understand how it would all go down before reading the pattern. After being reassured by my mom that it wasn't too feminine for my dad, I was totally sold.

I got some more practice with cabling with the band of this hat, which is made first and then sewn together. I did not want to sew fleece in as a liner, so I used a seed stitch on one side of the band to prevent rolling and stockinette stitch on the other. Then along this side a whole bunch of stitches are picked up (another thing I still need more practice on as well) and used to knit the rest of the hat. It then has a decrease pattern that makes a fun spiral on the top.


This pattern is actually pretty funky and leaves you alone to figure much out for yourself. I was lucky enough to get a measurement from my dad of his head size (28.25") and a classmate with the same size head for an example for the band. How many decrease rows to knit and when to add in the second set though... I was knitting blind on that one.

I made this hat twice. Go figure. The first time it ended up looking really nice! But... it was just to short. It didn't even quite cover my entire ear, and my head isn't as big as my dad's. Well, I guess I'll just hold on to that one for now.

For the second attempt, I added an inch of straight stockinette up from the band before decreasing. This came out to the right height! But when I finally got it on his head, I found that it's just kind of poofy in places that I don't want poofiness. In some ways it looks great, but it's still just not great. I was a bit bummed, but not really surprised.

If I were to make this again, I think I might go with the worsted version instead. Might make it a bit cleaner.

Also, it looks like this hat will need that liner after all. Since Dad is sensitive to wool but not as severely as Mom, I figured I'd give another natural fiber a try and went with super soft Alpaca. Turns out that itches him too. Good thing Mom is a master sewer!

Yarn:
Plymouth Yarn Company Baby Alpaca Grande Tweed (90% baby alpaca, 7% acrylic, 3% rayon)
100g/110yd skeins
1x dark gray (500) (plus just a little bit of another skein for the larger hat)

Needles:
US9 (5.5mm) 16" circular needle
----------
While I was working on that, I really wanted something else that I could just knock out and that I knew would fit someone, so I made Erich's A&F Knockoff Hat, too. This one got orange and gray acrylic and it was definitely fast. It's still hanging out in my apartment but it might go to the dads eventually, especially if I can't make anything else that works, haha.

Yarn:
Berocco Comfort Chunky (50% nylon, 50% acrylic)
3.5oz/150yd skeins
1x Dusk (5713)
1x Filbert (5745)

Needles:
US15 (10mm) 16" circular needle